Switching hydraulic motor is a hydraulic element with the characteristics of efficient, stable, energy -saving and durable. The quality of its parts assembly has a great impact on the performance and life of the wiring hydraulic motor. This article will briefly introduce the main points of the stagnation hydraulic motor assembly, hoping to provide some guidance for everyone.
1. Cleaning and rust -proof
Swing hydraulic motors must be cleaned and rust -proof before assembly. Soak all parts and attachments in oil removal and lipids, and clean up after dust removal. Use the cooling tower or locomotive pump to rinse the system to wash away the residues and oil membranes in the system. After all parts are completely dry, rust -proof treatment is performed. At the same time, pay attention to using clean cloth or paper towels to wipe all parts surface to ensure cleanliness.
2. Precision processing and quality inspection
The accuracy requirements of the hydraulic motor parts are high, so high -precision machine tools must be used when processing parts, and each part is tightly matched. Before assembly, check each part and attachment to ensure that there are no defects and defects.
3. Correct assembly
Be sure to pay attention to correctness and strictness when assembling. Gradually assemble each component according to the method stipulated in the instructions to ensure that each component is tight and correctly coordinated. Be careful not to install too hard to avoid damage to parts and affect performance.
4. Installation of oil seal and sealing parts
The installation of oil seal and sealing parts is a key factor affecting the sealing performance of hydraulic motor. When installing the foldable oil seal, pay attention to the direction and ensure that there is no leakage. At the same time, sealing and hydraulic motor shells must be sealed and combined. Please use hand wheels to be combined in accordance with regulations to ensure good sealability and rules.
5. Apply grease and test
The assembly line hydraulic motor needs to apply lubricating fat. Be careful not to apply too much, so as not to cause lubricating oil to flow into the system and cause failure. , Carry out the hydraulic motor test, check its operation, and ensure that both performance and durability meet the standards.
The above is the main point of the assembly of the hydraulic motor. Hydraulic element manufacturers should be executed in accordance with the above strict standards to ensure that the product has high quality, high reliability and long -term service life.