How To Disassemble The Hydraulic Motor

In the field of construction machinery, hydraulic motors are a common hydraulic transmission device. It transmits the conveying power to the mechanical drive section through pressure oil to achieve the normal work of mechanical equipment. However, during the long -term use of hydraulic motors, some failures will not be avoided, and disassembly and maintenance need to be carried out. So, what problems should be paid attention to in the process of disassembling the hydraulic motor?

In the process of disassembling, we must ensure that the disassembly operation is safe all the time, especially if you do not pay attention during the disassembly process, it may cause the pressure release at the hydraulic element, which may cause damage to the operator. Therefore, during the disassembly process, the disassembly process may be It must be operated carefully.

Secondly, before disassembling the hydraulic motor, we need to make some preliminary preparations, such as cleaning up the oil pollution around the hydraulic element, opening the hydraulic fuel tank, removing fastening screws, etc., so that we are more handy when disassembling.

Next, you need to disassemble the correct steps. The first is to disassemble the main part. When disassembling the main part, we need to carefully understand the location and sequence of disassembly in each part of the hydraulic motor. When disassembling the motor and output flange, it is necessary to operate according to the correct steps to avoid damaging the parts of the hydraulic motor.

After the disassembly is completed, we need to carefully check whether there is any omissions during the disassembly to confirm whether each part is cleaned up and whether the parts are normal. When reinstalling, you need to be carried out in the correct assembly order. It is necessary to ensure that it is clean and tidy during the operation, and the parts are firm and firm.

In short, when disassembling the hydraulic motor, we need to strictly follow the operating process to ensure the safety and correctness of the operation. At the same time, after disassembly, we also need to carefully check the situation of each part, especially when reinstalling, we must carefully check the installation of each part and follow the correct steps to avoid problems in later use in the later period of use.